SKF PF 30 WF bearing units

Basic Static Radial Load Rating Co:216000 N; Basic Dynamic Radial Load Rating C:179000 N; Accessories:Without Accessories; Fillet Radius ra:2.50 mm; D:230.0000 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; Grease Speed Rating Open/Shielded n1:2100 rpm; d:130.000 mm; B:40.00 mm;

B:9.00 mm; Grease Speed Rating Open/Shielded n1:24000 rpm; Oil Speed Rating Open/Shielded n2:30000 rpm; Sealed Speed Rating n3:17000 rpm; D:30.0000 mm; Accessories:Two Seals & Snap-Rin; d:10.000 mm; Oil Speed Rating n2:30000 rpm; Grease Speed Rating n1:24000 rpm; Basic Static Radial Load Rating Co:2

D1 ≈:468 mm; K:9 mm; B:220 mm; Calculation factor kr:0.34; Reference speed:850 r/min; s max.:16.7 mm; rb max.:1.5 mm; D:520 mm; Mass bearing:130 kg; da min.:390 mm;

da:101.6 mm; s:38.497 mm; A:89.694 mm; J max.:311.15 mm; Basic dynamic load rating C:426 kN; H:213.519 mm; L:361.95 mm; Attachment bolt diameter G:25.4 mm; Limiting speed:2200 r/min; B:80.169 mm;

Basic dynamic load rating C:2.34 kN; Calculation factor kr:0.025; Mass bearing:0.011 kg; D:22 mm; ra max.:0.3 mm; da min.:12 mm; d2 ≈:13.2 mm; B:6 mm; Fatigue load limit Pu:0.054 kN; da max.:13 mm;

d1:340 mm; G:Tr 380x5; B2:283 mm; Hydraulic nut:HMV 76 E; Mass withdrawal sleeve:35.5 kg; Nut for removal:HM 3176; A:9 mm; d:360 mm; G2:G 1/4; B1:274 mm;

Reference speed:5000 r/min; Fatigue load limit Pu:22 kN; Ew:88 mm; Basic static load rating C0:176 kN; Basic dynamic load rating C:68.2 kN; Fw:80 mm; Mass needle roller and cage assembly:0.14 kg; Limiting speed:6000 r/min; U:30 mm;

M:27.5 mm; d2:49 mm; d1:38 mm; f:5 mm; Mass lock washer:0.008 kg; d:30 mm; B:1.25 mm;

Sealed Speed Rating n3:2200 rpm; B:18.00 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:3600 rpm; Oil Speed Rating Open/Shielded n2:4300 rpm; Basic Static Radial Load Rating Co:43000 N; Basic Dynamic Radial Load Rating C:37700 N; Accessories:Two Seals; d:130.000 mm; D:165.0000 mm

Calculation factor kr:0.25; Limiting speed:2400 r/min; b1:6 mm; s max.:2 mm; d1 ≈:125 mm; Fatigue load limit Pu:49 kN; Da max.:144 mm; ra max.:1 mm; d:110 mm; r1,2 min.:1.1 mm;

Calculation factor Y2:5; da min.:966 mm; B2 ≈:375 mm; d2 ≈:1086 mm; r1,2 min.:7.5 mm; d1:900 mm; D:1360 mm; ra max.:6 mm; K:12 mm; Calculation factor Y0:3.2;

Lock washer:W 40; d:200 mm; Sleeve:S 40x7.1/4; B1:139.04 mm; Hydraulic nut:HMVC 40E; Threads per inch:8; d1:184.15 mm; G:199.314 mm; B:30.429 mm; Mass adapter sleeve assembly:14 kg;

Recommended diameter for attachment bolts, mm G:20 mm; SWN:11.113 mm; B:73.3 mm; Basic static load rating C0:49 kN; J:152.5 mm; Thread grub screw G2:7/16-20 UNF; s1:46.3 mm; DN:6.579 mm; Limiting speed:2600 r/min; GN:1/8-27 NPT;

r3,4 min.:2.1 mm; d:60 mm; d1 ≈:84.35 mm; B1:9 mm; B2:16 mm; Mass angle ring:0.24 kg;

Q150°:230 kN; Cap bolt, size:M 16x90; L:345 mm; Appropriate attachment bolt, rec. tightening torque:385 N·m; H2:35 mm; End cover:ASNH 218 R; Q180°:200 kN; Ca:65 mm; N:28 mm; Oil seal:2 x TSN 518 U;